Difference between revisions of "Quick Start"

From Protocase Designer Documentation
Jump to: navigation, search
m (Add silkscreen image)
m (Add silkscreen image)
Line 90: Line 90:
 
#Click '''Edit Face''' [[File:button-editface.png|40px|bottom]] and click the face to edit.
 
#Click '''Edit Face''' [[File:button-editface.png|40px|bottom]] and click the face to edit.
 
#Click the '''Bitmap''' tool [[File:tool-image.png|40px|bottom]] on the Drawing toolbar, then click on the face where you want to place the image.  
 
#Click the '''Bitmap''' tool [[File:tool-image.png|40px|bottom]] on the Drawing toolbar, then click on the face where you want to place the image.  
#In the Open dialog, select an image file (such as a custom logo) and click '''Open'''.<br>
+
#In the Open dialog that is displayed, select an image file (such as a custom logo) and click '''Open'''.<br>
 
#:'''Note''': You can enter an entire path, with or without the filename, into the dialog, then press <Enter> or click the '''Open''' button. If you enter just the path ending with a folder, the window will list the folder files and subfolders. If you enter the path and filename, the file will open.<br>
 
#:'''Note''': You can enter an entire path, with or without the filename, into the dialog, then press <Enter> or click the '''Open''' button. If you enter just the path ending with a folder, the window will list the folder files and subfolders. If you enter the path and filename, the file will open.<br>
 
#:[[File:window-faceeditor-logo.png|600px]]<br>
 
#:[[File:window-faceeditor-logo.png|600px]]<br>

Revision as of 16:56, 11 September 2015

This Quick Start guide walks you through the installation of Protocase Designer and its tools for creating, customizing, and quoting/ordering a design. For an overview of Designer features, click here.

Installing Designer

The installation process is the same for both first-time installations and upgrades.

  1. Before installing, ensure that your graphics card drivers are compatible with Opengl 1.2+ (such as ATI and NVIDIA) and that they are up to date.
  2. If you are installing Protocase Designer on a Mac OSX Mountain Lion, please follow the instructions in Installing Designer on a Mac OSX Mountain Lion.
  3. Close all versions of Protocase Designer before installing a new one. (If you are using Windows, when you try to install Designer while another copy is running, an error occurs and the installer exits.)
  4. On the [Download page], click the button for the appropriate download format. The download will begin.
  5. Open the Protocase Designer installer file in your Downloads folder.
  6. If you have previously installed Designer as the Administrator (or if your anti-virus software requires that you confirm that the file is safe), right-click the installer file in Windows Explorer and choose Run as administrator. (You might have to first choose Show in folder in Google Chrome, or Open containing folder in Firefox.)
  7. Follow the prompts to install.
  8. For first-time installations, after launching Designer, you are prompted to register. Be sure to do so, so that you can receive estimates, place an order, and access the online Cutout Library.

See Also:

Creating your enclosure

To begin designing your enclosure, select a template such as Consolet, Bracket, Panel, L shape, Rackmount, or U shape. You then customize various parameters including size, thickness, material, and color. A 3D model of your enclosure is then created, which you can customize further.

  1. Open Protocase Designer.

    Protocase Designer Splash Screen

  2. In the Pick an Option to Start dialog box, click New File.
    Pick an Option to Start dialog box

  3. Select an enclosure category on the left and then select an enclosure type.

    New Assembly Window

  4. Modify the enclosure parameters including size, thickness, material, and color to meet your design requirements.

    New Assembly Window

  5. Click OK to view the 3D model.

    New U-Shape Enclosure

Customizing your enclosure

To customize the faces of your enclosure, you use the Face Editor, which provides many standard editing tools for creating cutouts, silkscreens, exclusion zones, and construction lines.

Add basic cutouts

  1. Rotate the model to show the face you want to edit by dragging in the 3D View window.
    3D View window: U-Shape enclosure, rotated to show rear face
  2. Click Edit Face Button-editface.png on the toolbar.
  3. Click the face to edit.
    The Face Editor opens.
    Face Editor window: U-Shape enclosure, rear face
  4. Select a drawing tool from the Drawing toolbar.
  5. Draw shapes on the face to create cutouts.
    Window-faceeditor-ushape-rear-cutouts.png
  6. Click Accept and Close Button-acceptclose.png on the toolbar. You can then see these cutouts applied to your 3D model.
    Window-main-ushape-rear-cutouts.png

Add built-in cutouts

Protocase Designer offers a variety of built-in cutouts that you can add to your enclosure.

  1. Click Edit Face Button-editface.png on the toolbar and click a face to edit.
  2. Click Toggle Grid Button-togglegrid.png on the toolbar to show the grid and automatically turn on snap to grid.
    Window-faceeditor-ushape-cutout-grid.png
  3. On the Cutout Library and Fasteners menu, point to a category and then click a cutout item.
    Window-faceeditor-DB9menu.png
  4. Click on the face to place the built-in cutout.
    Window-faceeditor-ushape-db9.png

Add custom cutouts

You can create your own custom cutouts using the Path tool.

  1. Select the Path tool Tool-path.png on the Drawing toolbar.
  2. Click the face to place points of the path. Click the first point again to finish the path.
    Window-faceeditor-ushape-path.png
  3. Click Accept and Close Button-acceptclose.png on the toolbar to view your enclosure.
    Window-main-ushape-cutout-path.png

Note: You can quickly create complex cutouts by merging and/or trimming objects. See Using the Trim and Merge tools to create cutouts for details.

Add hardware

You can easily place hardware on your enclosure to accommodate various components, such as self-clinching fasteners (PEMs) to mount a PCB or handles.

  1. Click Edit Face Button-editface.png on the toolbar and click a face to edit.
  2. Click Toggle Grid Button-togglegrid.png on the toolbar to show the grid and automatically turn on snap to grid.
  3. On the Cutout Library and Fasteners menu, click Place Self Clinching Fasteners.
  4. From the Cutout Library, select the type of Self Clinching Fastener and its options
    Self-Clinching Fasteners Dialog Box
  5. Click Place PEM and click the face to add the fasteners.
  6. Continue adding fasteners and select the Edit tool Tool-edit.png when you are done.
    Window-faceeditor-pem.png
  7. Click Accept and Close Button-acceptclose.png.
  8. Choose Show/Hide Parts from the View menu.
    Show/Hide Parts Dialog Box
  9. Click to clear the Cover check box.
  10. Rotate the model to view the fasteners.
    Self-Clinching Fasteners on bottom face (cover hidden)

Note: You can also create custom brackets and add them to your enclosure. See Creating and adding brackets for details.

Add silkscreen text

You can add silkscreen text for labeling items on your enclosure.

  1. Click Edit Face Button-editface.png on the toolbar and click a face to edit.
  2. Click the Text tool Tool-text.pngon the Drawing toolbar.
  3. Click on the face and start typing to add text.
    Window-faceeditor-text.png
  4. Click Accept and Close Button-acceptclose.png.
    The text is shown in the 3D model.
    Window-main-text.png

Note: For images with multiple or gradient colors, specify direct digital printing instead of silkscreening. Or, you can add a note to ask Protocase to use dot peening, which is a permanent marking process that does not use ink.

Add silkscreen image

You can add silkscreen images such as logos or other graphics on your enclosure.

  1. Click Edit Face Button-editface.png and click the face to edit.
  2. Click the Bitmap tool Tool-image.png on the Drawing toolbar, then click on the face where you want to place the image.
  3. In the Open dialog that is displayed, select an image file (such as a custom logo) and click Open.
    Note: You can enter an entire path, with or without the filename, into the dialog, then press <Enter> or click the Open button. If you enter just the path ending with a folder, the window will list the folder files and subfolders. If you enter the path and filename, the file will open.
    Window-faceeditor-logo.png
  4. Click Accept and Close Button-acceptclose.png to view the 3D image.
    Window-main-logo.png

Note: You can specify direct digital printing instead of silkscreening for images with multiple or gradient colors. See Adding silkscreening or direct digital printing for details.

Quoting and ordering your enclosure

Once your design is complete you can instantly receive a quote and order your enclosure online.

  1. On the Instant Quotes and Purchasing menu, choose Instant Quote, Purchase, or Create Requisition for my purchasing Department.
    A web page page will open, guiding you through the steps to receive an instant quote or purchase your enclosure.
    Window-purchasing.png