Difference between revisions of "About Measurements and Fabrication Tolerances"
From Protocase Designer Documentation
(Created page with "Whether submitting your own CAD file or a file from Designer (which provides dimensions for the metal components only), tolerances for finishes, cutouts, profiles, bends, and ...") |
(No difference)
|
Revision as of 17:10, 26 May 2015
Whether submitting your own CAD file or a file from Designer (which provides dimensions for the metal components only), tolerances for finishes, cutouts, profiles, bends, and welding must be considered. For details please see Fabrication Tolerances. For a quick reference, download the Fabrication Tolerances Diagram.
The following documents also have important detail on specifying measurements for specific designs:
- Designing enclosures for motherboard-based systems
- Creating an enclosure to mount a PCB
- Selecting height of self-clinching fasteners based on material
thickness
When using Designer, if you need a part that is not stocked, you can add a similar part for purposes of placement and length, and use the Note tool to specify the exact part that you really want. Non-stocked parts incur additional time, and you will be informed of that cost.
See Also
