Revision as of 13:34, 27 October 2015

3D View Window overview

The 3D View window displays a 3D model of your enclosure that you can manipulate.
A: 3D View Toolbar
B: Viewport

Creating, opening, and saving assembly files

Creating a new assembly file

1. Choose File > New, or click the Make New Enclosure From Template button in the 3D View toolbar. The New Assembly dialog opens.

   

2. Select an enclosure category on the left and then select an enclosure type.

   

3. Modify the enclosure parameters including size, thickness, material, and colour to meet your design requirements. Be sure to conform to any Manufacturing Constraints if they are listed at the bottom of the window.
4. Click OK to view the 3D model.

   
   

Notes

• When you select a rackmount, the parameters include the Full Height Chassis check box. Selecting this checkbox causes the screws to be countersunk, and the enclosure the same height as the front of the rackmount.
  
• To create a custom bracket with cutouts and other elements, you use the 3D View window to create them, then you use the Face Editor to customize them and to add them to a face. See Creating and adding brackets for step-by-step instructions.

Opening an existing assembly file

1. In the 3D View window, choose Open from the File menu, or click the Open button on the toolbar.
2. Select the file you want to open.

Saving an assembly file

• Choose File > Save or click the Save button on the toolbar.

If this is the first time the assembly is being saved, the Save dialog box opens. Select a location and enter a name for the file, then click Save.

Saving a copy of an assembly file

1. Choose Save As from the File menu, or click the Save As button on the toolbar.
2. In the Save dialog box that opens, select a location to save the file and enter a new name for the assembly, then click Save.

Changing enclosure properties

At any point after you create a new enclosure you can modify your enclosure properties such as size, thickness, material, and colour.

1. On the Edit menu, click Edit Enclosure Properties.

   The Edit Assembly dialog is displayed.

   

2. Change any of the enclosure properties, but be sure to conform to any Manufacturing Constraints if they are listed at the bottom of the dialog.
3. To save the modifications, click OK.

Viewing the model

There are several controls to allow viewing and manipulating the 3D model of your enclosure.

Rotate model

The Rotate command spins the model around its center.

1. On the 3D View toolbar, click the Rotate button.
2. Drag the model to rotate it to the desired orientation.

Pan model

To move the model around the plane of the viewport, do any of the following:

• Right-click the model and drag it.
  
• Press and hold down the <Alt> key, then click and drag the model.
  
• Click the Pan button on the toolbar, then click and drag the model.

Zooming

To zoom the model in or out, rotate the wheel button forward or backward.
Notes

• The model zooms in/out from the centre of the viewport, regardless of the pointer location.
  
• If your pointing device does not have a wheel, open the Face Editor and use the Zoom In and Zoom Out buttons on the toolbar or the Zoom commands in the View menu.
  
  

Show/Hide Parts

The Show/Hide Parts command lets you view inside the model by hiding one or more parts.

1. On the View menu, click Show/Hide Parts. The Show/Hide Parts dialog box is displayed.
2. Select or clear the appropriate check boxes to show or hide parts.

Toggle flat/bent view

The Toggle Flat and Bent commands displays the enclosure parts as they are laid out prior to the bending process during manufacturing. These commands are for reference only, and do not affect the manufacturing of the final enclosure. You can do either of the following:

• On the Toolbar, click the Flat button to display the model in a flat view, or click the Bent button to display the model in the default bent view.
• Choose Toggle Flat from the View menu to change between the two views.

Reset view

The Reset View command displays the model in the center of the viewport in its original orientation.

• Click the Reset View button on the toolbar, or choose Reset View from the View menu.

Use Transparency

The transparency option makes exclusion zones and the background of silkscreen images transparent. This allows you to view features that might be hidden behind exclusion zones or silkscreen images.

1. On the Edit menu, click Preferences to display the preferences dialog box.
2. Select the Use Transparency check box.

Note: Turning on the transparency option does not affect the final product.

Change background color

The Change background color command allows for customizing the background color of the viewport.

1. On the Edit menu, click Preferences to display the preferences dialog box.
2. Click Change Background Color. A dialog box opens, where you can customize the background color of the viewport.
3. Select the Swatches, HSB, RGB.

Change axis color

The Change Axis Color command allows for customizing the color of the coordinate system axis displayed on the model.

1. On the Edit menu, click Preferences to display the preferences dialog box.
2. Click Change Axis Color. A dialog box opens, where you can customize the axis colour.

Editing a face using the Face Editor

To customize your enclosure, you add features such as cutouts, silkscreen, exclusion zones, and construction lines to a face in the Face Editor Window.
To open the Face Editor:

1. Rotate the model to show the face you want to edit.
2. Click the Edit Face button on the toolbar. . The pointer will change to a crosshair.
3. Click a face to edit. The Face Editor window opens.

Viewing the Part Tree

The Part Tree shows a hierarchical list of all the faces and objects in your enclosure. You can change the name and description of objects as well as open a face in the Face Editor Window directly from the Part Tree.

Navigate the Part Tree

1. Click the icon to the left of a face to display the objects on that face below.
2. Click an object name to display description, and notes on the right of the Part Tree window.

Change object name and description

1. Click an object name on the left.
2. Type a new name or description on the right.

Add/Delete notes

You can add notes to parts, faces, and objects for your own reference or to provide additional information to technical support such as "Please scrub this with a scouring pad". You can also use it to place features that might not be permitted in Protocase Designer® but can be manufactured with certain restrictions. For example, you could create a circle using construction lines near the edge of a face on the exclusion zone (where you wouldn't normally be able to place a self-clinching standoff) and add a note "Add 6-32 x 3/8" standoff here".

1. Click an object name on the left.
2. Do one of the following:
   • If there are no notes, type a note in the notes field.
   • If there are existing notes, click New Note and type a note in the notes field.
3. Click the arrows to view each note.
4. Click Delete Note to delete the currently displayed note.

Editing a face from the Part Tree

1. Click a face name on the left.
2. Click Edit Face. The Face Editor window opens.

   

Note: The Part Tree window can also be accessed from the Face Editor.

Window Preferences

You can change the background color and the axis color in the 3D View. See Face Editor Preferences for changing the background color and axis color. (The Preferences dialog box is used for both the 3D View and Face Editor windows,)