Difference between revisions of "Knowledgebase - Planned Enhancements"
From Protocase Designer Documentation
Line 7: | Line 7: | ||
Until any one of the following enhancements is added to Designer, you can add a note in your design asking for it: | Until any one of the following enhancements is added to Designer, you can add a note in your design asking for it: | ||
− | |||
*'''Louvres''' | *'''Louvres''' | ||
*'''Screws or welding to fasten brackets''' | *'''Screws or welding to fasten brackets''' | ||
*'''Hinges''' | *'''Hinges''' | ||
*'''Drawer slides''' | *'''Drawer slides''' | ||
− | + | ||
Until any one of the following enhancements is added to Designer, please call and talk to our technical staff to add it to your design: | Until any one of the following enhancements is added to Designer, please call and talk to our technical staff to add it to your design: | ||
*'''Machining''' (see [[http://www.protocase.com/products/cnc-milling.php CNC Milling]] for details) | *'''Machining''' (see [[http://www.protocase.com/products/cnc-milling.php CNC Milling]] for details) |
Revision as of 15:00, 12 March 2020
Planned enhancements are added here when they are identified and approved for development.
- Notches in Bends - Adding the ability to Notch a bend when cutouts are placed in a position that the bend is likely to cause them to stretch.
- D-Port cutouts - We will be updating the placement of D-ports to allow two flat edges.
- STEP file Import and Export - We will add the ablilty to export to STEP files, and import that file into other CAD software.
Until any one of the following enhancements is added to Designer, you can add a note in your design asking for it:
- Louvres
- Screws or welding to fasten brackets
- Hinges
- Drawer slides
Until any one of the following enhancements is added to Designer, please call and talk to our technical staff to add it to your design:
- Machining (see [CNC Milling] for details)
- Hybrid enclosures (see [Hybrid Enclosures (Extruded/Milled)] for details)
The following feature has not yet been fully implemented:
- Cutout Library Manager > Create Sub Assembly: When loading an item you have created, its 2D footprint is displayed, and not the 3D View.
See Also: